Mold Making Silicone Thinner - GT Products, Inc
Mold Making Silicone Thinner - GT Products, Inc
GT Products silicone thinner can be used to drop the viscosity of any mold making silicone. This thinner is a 50 Centistoke Dimethyl Fluid and will be compatible with any GT Products Silicone system. Lowering the viscosity of a mold making system can allow the silicone to easier flow into smaller detail. GT Products, Inc. recommends only adding 3% to 5%. Adding too much silicone fluid can adversely effect the physical properties of the silicone itself. Tear and tensile strength will be the most greatly effect properties if too much silicone thinner is used.
Silicone Mold Putty - All Sizes – brickintheyard
Silicones - Hobby Silicone
Silicone Thinner™ is a non-reactive silicone fluid that will lower the mixed viscosity of tin cure (condensation) or platinum cure (addition) silicone
Smooth-On Silicone Thinner™
Tin Cure 5092 Slow, Medium, & Fast Set Mold Making Silicone - All Kit – brickintheyard
RTV-2 Liquid Silicone Rubber Tin Cure for Cement Pot - China Liquid Silicone Mold Making, Silicone Raw Material
4 Lid Silicone Mold – Modern Craft Labs
BBDINO Super Elastic Silicone Mold Making Rubber Platinum Trial Kit – BBDINO Direct
Silicone Thinner
ER-200 Release Agent
GT Silicon - Silicon Manufacturer/ Factory-RTV-2 Silicone, Liquid Moldmaking, LSR, Platinum Silicone